ASSEMBLY STEPS
2. Assembling the Squid
Step
Remove the
2 squid mounting
rings (1)
and
6 squid arms (2-7)
and
remove cutouts.
Match each arm into the mounting ring
slots, starting with squid arm (2), and
having all the remaining arms “flow” in
the same direction (limbs rearward).
2.1
As the parts are all labeled and marked on the panel, the build is a simple process of
find, prepare, and assemble. The parts are cut so you only have to carefully rock them
out of the panel to break them free.
2.2
With all two tentacles and 8 arms
(yup, we checked) installed, your squid
should look like this. Put him/her/it
aside, and we will start on the
submarine.
2.3
5
(2)
(3)
(4) (5)
(6)
(7)
Squid Arm Assembly
(8)
(9)
(10)
(11)
(1)
(1)
Locate the the remaining
4 squid
arms (8-11)
, and the
3/4” ball bearing.
While cradling the ball in the cup formed
by the first set of limbs, slot the
remaining limbs around the bearing,
finishing the squid assembly.
bearing
bearing
