7
. Replace the terminal box lid and fit the infill pieces by locating the lower tabs into the
locating tabs on the curved arms. Once located the upper tabs can be screwed into position
with M4 screws and shake-proof washers in the threaded holes. Repeat for the other sides
(total of three).
14
of 20
Ref No. 043477-EN Rev. A
8
. The debris protection cover can now be fitted by ensuring the lip on the edges go over the
infill pieces and lining the slots up with the holes in the curved arms. Fix in place with M4
screws and shake-proof washers.
9
. Remove the zip tie and check all screws in the individual post sections are fully tightened.
Adjust the heaters to the desired downward positions. Conduct all necessary electrical
safety checks including the ground continuity of the system.
LOWER TABS/
LOCATING TABS
UPPER TABS
THREADED HOLES
FOR
DEBRIS COVER (3)
SCREWS FIXING
DEBRIS COVER (3)
Содержание Malibu MAL 45240
Страница 15: ...15 of 20 Ref No 043477 EN Rev A GENERAL SIZES...
