Sola Hevi Duty S5K, Руководство пользователя

Страница: 22 / 56

18
COMMUNICATIONS
COM Ports
The S5K Modular UPS is able to communicate
through multiple communication ports
simultaneously. Use only Sola/Hevi-Duty-provided
communication cards. Connect only SELV/Class 2
circuits when connecting to any communication
port.
Pin Assignment
COM 1 - Relay Contacts
Relay contacts are available through a DB-9F
communications connector. Contact closure
provides the following:
The contacts are rated 48 VDC, 1 amp maximum
and are compatible with the MultiLink software.
COM 2 - Serial
The S5K Modular UPS is able to communicate via
Sola/Hevi-Duty proprietary protocol. The pin-out
configuration of the DB-9 connector is:
Intellislot™ Ports
The following communication cards may be used
with the S5K Modular UPS:
• Intellislot™ SNMP cards —allows the S5K
Modular to communicate intelligently with your
Ethernet network. The SNMP card must be
installed in port 1; any additional cards can be
added in consecutive ports.
• Intellislot™ MultiPort4 cards —allows up to
four client computer systems to monitor the
status of the S5K Modular
simultaneously.
• Intellislot™ Relay Contacts cards —provides
contact closures for remote monitoring of
alarm conditions; On Battery, On Bypass, Low
Battery, Summary Alarm, UPS Fault and On
UPS signals. It will integrate with AS400
computers (additional cable required) and
other monitoring systems.
Pin Assignment
1 Low Battery (normally open)
4 UPS shutdown in battery mode
(5-12 V DC for 1.5 sec)
5 Common
7 Low Battery (common)
8 On Battery (common)
9 On Battery (normally open)
Pin Assignment
2 Transmit Data
3 Receive Data
5 Common
5 4 3 2 1
6 7 8 9
Port 1 Port 2 Port 3 Port 4
COM 1 COM 2