Seat width (cm)
Seat length (cm)
Height of connection point (cm)
Spring
(Kg)
Spring Airbag
(Kg)
Harness measures
M
L
XL
35
37
39
36
38
40
39
41
43
(
)
Without Back Protector, Seat, Reserve
Parachute, Carabiners and Lateral Protectors
(
)
Without Back Protector, Seat, Reserve
Parachute, Carabiners and Lateral Protectors
TECHNICAL DATA
Maximum pilot weight allowed: 100 kg DHV
(Prüf-Nr. 11071400-11071421
SOL
FLEX AB (ABS) )
·
Back Protector 18 cm: 0.95Kg
·
Seat Board: 0.80Kg
·
Side Protectors: 0.26Kg
Size Table :
4,6
4,7
4,8
5,3
5,4
5,5
55
54
Use water and neutral soap to clean your
SOL
Harness,
avoiding scrubbing
over the sewn areas.
Cleaning:
WATER LANDING
Usually safety courses are taught over water, or a poorly calculated landing
may force you to land in the water. In this event, you must be careful since
the back protector at the first moment will act as a floating device, therefore
forcing your head into the water and you could be in danger of drowning.
The foam, already saturated with water will get heavy and may naturally sink.
After a water landing you need to tear off the back protector, seat board,
reserve parachute, all lateral protectors and let them all dry under shade in
a breezy area.
It is very important to maintain all pulleys, carabiners, click-lock buckles
well lubricated, as this will keep from stressing the speed system lines and
guides. Apply wax or lubricant spray. Read carefully about the lubricant to
avoid spots and fabric deterioration. Do not apply on the stichings.
Pulleys, Carabiners and Click lock buckles