TENSION SPRING RETRIEVE SYSTEM
The
Spring
and
Spring Airbag
has a tension
spring
retrieve
system for the speed bar. It
makes sure that it maintains
close beaneath the seatboard
when not in use. Primarly for not
to interfere in an eventual rescue
deployment. The elastic need to
be installed as close as possible
to the speed bar but without any
tension applied.
INSTALLING THE FOOT STIRRUP
The foot stirrup that ac-
companies the harness
will be disconnected
automatically for your
safety in case of a rescue
deployment together with
the deployment handle.
49
INSTALLING THE SPEED SYSTEM
A system of pulleys is in task for
the load and travel of the speed
bar. The lines run on each side
from the D-ring (1), to the eyelet
(2), passing through the 2 pulleys
(3+4). The end of the cord is being
knotted (5-9) with the sister clip (A)
to be connected to the sister clip (B)
After the installation, the speed system
need to be sharp tuned to optimize
STORAGE IN THE AIRBAG COMPARTMENT
The paraglider back pack can be
easily stored in the pocket of the
Airbag compartment.
WATER BALLAST COMPARTMENT
Your harness
Spring
or
Spring Airbag
has
at its disposal a water compartment located
in an aerodynamically efficient place in the
rear pocket with easy access.
of the riser on each side
its travel and function.
48