FINAL ADJUSTMENTS
Before any take-off with your new
SOL
Harness
, make sure to perform the
following inspection in detail:
1) check, i
2) check, i
3)
4) check, i
f all pockets are closed correctly;
f reserve parachute handle is in the
correct position;
check, if all click log buckles are connected;
f the recommended carabiner distance is
set according to the paraglider’s certification.
INSTALLING A COCKPIT
A cockpit for your instruments can be connected to the main carabiners. You shoud choose
the right model according to the functions it should perform (cockpit for instruments only,
as in the picture; cockpit for instruments with water ballast container or cockpit for instru-
ments with rescue container).
51
INSTALLING THE TOW RELEASE SYSTEM
Your
SOL
harness is suitable for towing, provided that it is attached to the
tow release system.
This must be fitted on the same carabiners that link the harness to the
paraglider, being activated by an elastic rope conveniently located which
releases the equipment for flight when pulled.
In any doubt, please consult the tow driver and the handbook of your
paraglider in the section ‘towing’.
Pay attention to the correct installation
of the speed system and the foot stirrup
to avoid any interference in case of a
rescue deployment.
50