SOL paragliders Flexus LOTUSOne, Руководство пользователя

Страница: 31 / 41

31
Cleaning
Cleaning must be performed only when it is absolutely necessary. We recommend the
use of water only with a smooth sponge or cloth. Do not use any chemical product,
since it will damage the material permanently.
Maintains and inspection
The first inspection check is mandatory completing 1 year or 100 flights, whichever
comes first. After the first inspection any wing has to be checked after 6 months or at
each 50 flights, whichever comes first. In any of these inspections may occur that a
shorter period of time for the next inspection will be defined (f. ex. 4 months or 30
flights). It is of utmost importance to follow these guidelines. Without performing the
mandatory inspections, the power glider loses its certification and the respective
S S O O L L
warranty becomes null and void.
Pulleys
It is important you keep pulleys lubricated because in case they
do not work may consume the speedy handle or axle, apply
paraffin or lubricant spray, read carefully about the lubricant to
avoid spots and fabric consume. Do not apply on the sewing
lines.
Attention
When buying the lubricant make sure that this product do not attack the material
properties. This may affect the fabric and lines resistance.
Recommendations for a long life
The
F F l l e e x x u u s s
fabric is made mainly out of Nylon, which like any other
synthetic material is sensitive to UV light radiation, causing it to
decompose, losing its mechanical resistance, and thus increasing its
porosity. For this reason, the unnecessary exposure to sun light,
which carries a high UV radiation level in high altitudes must be
avoided. It is highly recommended to leave the power glider stored
away and well protected when it´s not being used.
The
F F l l e e x x u u s s
lines are made of a aramide (technora), with a Polyester cover. Individual
line overloads beyond the normal range in flight must be avoided, because an
excessive deformation of the line is irreversible, and becoming permanent. The same
way, folding and creasing the lines must be avoided, specially the main lines. Never
step over the lines or canopy, above all on hard surface.
The canopy must be opened only on a clean surface area, since dirty can penetrate in
the canopy's fiber, shorten the lines or spoiling the fabric. The lines must be kept from
any entanglements on takeoff to prevent excessive deformation.