Sokkia RC-PR3, Системное руководство

Страница: 16 / 68

4. ON-DEMAND REMOTE CONTROL FUNCTIONS
10
This section explains the measurement procedure for a single operator working from the RC
controller. An operator working alone will need a data collector (available as an optional accessory).
G
• When reflected laser signal is strong (object with high reflection factor):
If there is an object with a high reflection factor, such as a window or standing water, in the vicinity
of the total station/prism, the laser beam may be reflected and Turning operation performed pointing
at the object instead of the RC controller. In this case the accuracy of measurement results may be
adversely affected.
• Fix the pole vertically over the measurement point.
$
• For communication settings for data collectors etc., see the operator’s manual for your respective
device.
X
PROCEDURE
1. Connect the instruments.
C
"5. SYSTEM CONFIGURATION"
2. Switch ON the power to the total station. Open
the beam detector cover.
3. Set measurement settings for the total station
and select prism type.
C
"6.2 Settings for Auto Pointing and Auto
Tracking", "7.4 Setup for Search Before
Distance Measurement"
Prism selection: Operator's Manual
(Series SRX/NET05/NET1) "21.3 EDM
Settings", Series 230RM Operator’s
Manual "23. CHANGING THE
SETTINGS -CONFIGURATION-"
4.2 Measurement Flow
Beam
detector