manualshive.com logo in svg

Sokkia 130R Series, Руководство оператора, Страница: 138 / 182

Поделиться
Скачать
Sokkia 130R Series Скачать руководство пользователя страница 138

25. CHANGING THE SETTINGS

130

3. Input new password twice and 

press 

{

I

}

. The password is 

changed and <Config> is 
restored.

• If no password was input as new 

password and 

{

I

}

 was 

pressed, no password is set.

$

• Input range of password: 3 or more characters and 8 or fewer characters

The following explains the two methods of restoring default settings: 
Restoring set items to initial settings and turning power on. Initializing the data 
and turning power on.

• Restore the following items to the initial settings when the SET was shipped.

EDM setting, Config mode settings (including softkey arrays)

C

About initial settings when the SET was shipped, "25.1 EDM Settings", 

"25.3 Allocating Key Functions".

• Initialize the data. The following data is initialized.

Data within all jobs
Known point data within memory
Code data within memory

X

PROCEDURE  Restoring set items to initial settings and turning power on

1. Turn the power off.

2. While pressing 

{F4}

 and 

{BACK 

SPACE}

, press 

{ON}

.

3. The SET is turned on, “Default 

set” appears on the screen and all 
items are restored to their initial 
settings.

25.5

Restoring Default Settings

C h a n g e   p a s s w o r d
N e w   p a s s w o r d

N e w   p a s s w o r d   a g a i n

X130R.book  130 ページ  ２００３年１０月８日　水曜日　午後１２時５３分

Содержание 130R Series























































































































































































Отзывы:

Нет отзывов