2
The 4400 can now be safely moved for final assembly or completed and moved (as shown in figure 7).
The product unwind arm is detached for shipping and must be re-attached (see figure 8). Position the arm so
the holes in the arm are in alignment with the holes in the back plate (see figure 9). Screw three of the mounting
bolts into the back plate. Do not tighten. The paper guide then gets attached to the unwind arm from the rear of
the back plate (see figure 10). Once all bolts are in place visually check that the space between the bottom of the
arm and the base of the machine is even. Tighten all four mounting bolts securely.
Fig. 7
Fig. 8
PRODUCT UNWIND ARM
DETACHED
PAPER GUIDE
BACK PANEL
MOUNTING BOLT
HOLES
BACK PLATE
Fig. 9
Fig. 10
Содержание 4400
Страница 2: ......