ELEMENT RACK INSTRUCTIONS
Installation of the rack
1
For 2" racks only. Check to make sure that the
nut inside the rack hitch bar is aligned with the
hole in the hitch bar. Adjust with a screw driver
if necessary.
2
Slide the rack into the receiver hitch of
the vehicle.
3
Line the hole in the hitch bar with the hole in
the receiver hitch.
4
Place the lock washer on the hitch bolt and
thread it into the nut in the hitch bar. For 2"
racks tighten the hitch bolt to 60 foot pounds.
For the 1.25" racks tighten the hitch bolt to 40
foot pounds.
11
2
3
