ELEMENT RACK INSTRUCTIONS
Assembly of Rack
1
Begin assembly of your Element rack by remov-
ing the main rack assembly and the 2 arms
from the box. Attach the arms to the main rack
assembly so that the yellow bails on the ends
of the arms are pointing up. Use the detent
pins provided to secure the arms in place.
2
To convert your 2” rack to a 1.25” rack you will
need to add on the 1.25” assembly to the 2”
hitch bar. Remove the nut holder from the
inside of the 2” hitch bar assembly. Slide the
three-holed nut plate inside the 2” hitch bar,
aligning the holes. Pass the three bolts through
the lock washer and 1.25” hitch bar and
tighten to the nut plate. Make sure the three
bolts are tightened securely and recheck the
tightness of the bolts from time to time.
3
Place the straps on the bike arms.
2
1
33
2
