ELEMENT RACK INSTRUCTIONS
Important
This bike rack is designed for use in a 2” or 1.25” receiver and designed to hold a maximum of four bikes. Do not
use this rack for anything other than carrying bicycles. Do not exceed your vehicle’s receiver load ratings for any
reason. This rack cannot be used on Class 1 vehicle receivers. Reference the instruction manual for proper use of
this rack.
Warning
Check the tightness of bolts and nuts periodically as they may loosen slightly during normal use.
DO NOT drive the vehicle with the bike rack in the lowered position.
This rack CANNOT be mounted and used on the rear of trailers.
This rack MUST be removed from the vehicle before going through a car wash.
(A)
Main rack assembly
(B)
Bike rack arms (2)
(C)
Arm straps (8)
(D)
Hitch bolt with lock washer (5/8" for 2" rack, 1/2" for 1.25" rack)
(E)
Soft wraps (4)
(F)
Detent pins (2)
(G)
1.25” Hitch Bar
PARTS INCLUDED
Adjustable wrench (2)
Screw driver
TOOLS REQUIRED
(D)
(B)
(F)
(A)
(E)
(C)
(G)
Model #26248
