Softing TH LINK, Руководство по установке

Страница: 13 / 16

Chapter 3 - Configuring the device in the network
Copyright 2017 Softing Industrial Automation GmbH
13
Figure 7: Settings page of TH LINK web interface
3.6 Check the connection to the device
You can check the device's connection in the network. Start a web browser on your PC/notebook.
For DHCP: Enter the hostname http://THLINK-serial number (e.g.: http://THLINK-143500067) and
press Enter .
For manual IP configuration: Depending on the network in which your PC/notebook is installed,
enter the specified IP address of the office or automation network (basic setting: 169.254.0.1 or
169.254.0.2) and press
Enter .
Now the website of the TH LINK should be displayed in the web browser.
3.7 Firmware update
Firmware updates for the TH LINK are available free of charge from our website. Proceed as follows:
1. Click Settings and then Firmware Update .
2. Check if the requirements for a firmware update are met. Stop the current measurement.
3. Download the latest firmware version from ( http://industrial.softing.com/en/downloads.html ) and
save it to a local directory.
4. Click [...] and then select the firmware file.
5. Click Start .