Softing TH LINK, Руководство по установке

Страница: 12 / 16

TH LINK Industrial Ethernet - Installation Manual
12
Copyright 2017 Softing Industrial Automation GmbH
3.5 Setting new IP and network address
For configuration of IP-address of the TH LINK, please perform the following steps:
1. Inside the web interface, click on Settings and then on TH LINK .
2. In menu Network configuration switch the configuration method for office networks and/or
automation networks from DHCP to Manual .
3. Enter the new IP address.
Note
Note down the IP address. You can only access the device's configuration page by using this
IP address.
4. Enter the new addresses for Subnet mask and Default gateway .
5. Enter the IP address of the DNS server .
6. Click on the floppy disk sign to save the settings. The device then performs a restart.
Note
The default password can be changed on the TH LINK 's settings page. One the web
interface, click
Settings > TH LINK and change the password under " User administration ".
Click "Change password" to finalize.
Note
The device is preset to network operation with a DHCP server and in this case it is
automatically assigned an IP address. No network configuration settings are required in this
operating mode. The routine for the DHCP identification only runs during device start-up.
Briefly switch off the power supply for a new DHCP identification.