© Softing Industrial Automation GmbH
Chapter 3 - Hardware Installation
13
Note
Both network connections (ports) have their own network segment. Thus make sure that IP
addresses used differ depending on the network segment.
Example:
Subnet mask:
255.255.255.0
IP address 1:
192.168.
1
.1
IP address 2:
192.168.
2
.1
Common Network
If there is only one (logical) network, than it is recommended to connect only the IT Ethernet interface with
this network. In this case the Ethernet interface of the machine side should be disabled by assigning the IP
address
0.0.0.0
and the subnetmask
0.0.0.0
to it (see the Machine Network section).
3.4
Powering Up the Device
Turn on the power supply. The boot process takes a few seconds. For indication of proper operation of a
edgeGate refer to the
