edgeGate - Quick Startup Guide
14
© Softing Industrial Automation GmbH
3.5
Inserting a Micro SD Card
On the bottom of the device you find a slot for a micro SD card. You can save your gateway configuration
data to a storage card and reload it from here in case your device settings have been accidentally corrupted.
Note
The micro SD card is not included in the delivery. When selecting a micro SD card bear in mind
the range of the operating temperature of edgeGate. The storage capacity of the micro SD card
may not exceed 32 GB.
1. Remove the card slot cover on the bottom of the device.
2. Insert the micro SD card carefully into the slot until the card clicks into place.
3. Place the cover back on the housing.
4. Open the user interface of the gateway and check if the micro SD card is recognized by the device (see the
Configuration and Login section).
5. Start
Information
Gateway Status
Hardware Status
.
The page will show you if the micro SD card is recognized in the file system and how much of the storage
memory is available.
