manualshive.com logo in svg

Softing CableMaster, Руководство пользователя

Поделиться
Скачать
Softing CableMaster Скачать руководство пользователя страница 20

20

http://itnetworks.softing.com

CableMaster 400

•  tIf multiple wire mapping remotes are found, the ID or fault is displayed 

automatically in sequence

Figure 10. Detected Coax Remote

USING TONE MODE

Tone Mode is used to trace cable runs and locate faults by sound. Selection of this

mode emits a cadence from the main tester through the connected cable. The tone is

detected by a tone tracer probe (sold separately. Refer to the Additional Accessories

section).

Note: It may be impossible to differentiate between the tone generated from the test

pair and the sound emitted by neighboring wiring pairs within the cable.

1. Connect one end of the cable to the main tester. The remote tester is not used.
2. Press the TONE MODE button.
3. To select a Tone Cadence, press the TONE MODE button repeatedly to step through 

the 4 cadence options: HI, LO, Hi-Lo1, and Hi-Lo2. Stop when you reach the option 

you want.

The option you select determines the cadence sent from the main tester, through the

cable, and picked up by the tone tracer probe.

Note: If you do not adjust the cadence, the main tester will default to the last selected 

cadence.

4. Press the appropriate cable type button (voice, video, or data) to select a cable for 

the tone signal.

5. Press the cable type button again to select different combinations of pins to carry 

the tone signal. Each press of the cable type button steps you through the cable’s 

wire pairs. The selected pin pair appears in the Wire Map. Figure 11 shows pin pairs 

1 and 2 selected for testing a data cable. The following appears in the LCD display 

screen:

123 4 5 67 8

Video

ID

Содержание CableMaster





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды