User Manual
copyright by
21
Flowpad Bedienungsanleitung
The LOU deck plate and board are connected by special double-sided fastener strips which lock together. To remove the
deck, there is a small notch at the “tail”, where you can loosen the deck from the board with your finger. To avoid damage
to the board or deck plate, use a plastic utensil if you can't remove the deck using only your finger. Now pull the deck upwards
slowly until the whole deck has loosened itself. To affix the deck on the board again, start at the “nose” and place the deck
from front to back on the board. Be sure that the two parts of the fastener strips are placed exactly on each other to achieve
maximum grip. Press the deck against the board, right above the fastener strip, until you hear a clicking sound. The easiest
way to do this is to stand on the deck and apply pressure with your feet.
The fastener strips are very durable and easy to handle. If a fastener gets dirty, you can clean it carefully with a damp cloth.
However, keep the damp cloth away from the electronic components.
4.6 Wheel change
All the wheels can be changed with the tools included in the scope of delivery. The non-driven wheels can be changed by
loosening the wheel nut. You can then exchange the old wheel with a new one before tightening the wheel nut once again.
Changing the driven wheels is also just a matter of a few minutes. To do so, loosen the three screws located on the front
side of the engine. You can now remove the cover with the LOU logo. Remove the thin rubber wheel from the engine by
pulling it forward and replace it with the new wheel. Put the cover back on and tighten the three screws once again. Done.
