SOFAR 3.3~12KTLX-G3
User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd.
- 42 -
(A)Enter setting Interface as below
：
1.Enter Setting
--------Long press DOWN button
1.Set time
7.Set Address
2.Clear Energy
8.Set Input mode
3.Clear Events
9.Set Language
4.Country Code
10.MPPT Scan
5.On-Off Control
11.Logic Interface
6.Set Energy
12.Set Power Ratio
Long press the button to Enter the main interface of "1. Enter Setting" and long
press to enter the setting menu. You can select the content you want to set by
short pressing the button.
Note1: Some settings need to enter the password (the default password is
0001), when entering the password, short press to change the number, long
press to confirm the current number, and long press after entering the correct
password. If "password error, try again" appears, you will need to re-enter the
correct password.
1. Set Time
Set the system time for the inverter.
2. Clear Energy
Clean the inverter of the total power generation.
3. Clear Events
Clean up the historical events recorded in the inverter.
4. Country Code
Long press button, enter interface, save the specific file into USB and insert USB
into inverter communication port
5. On-Off Control
Inverter on-off local control.
6. Set Energy
Set the total power generation. You can modify the total power generation
through this option.
7. Set address
