Sofar solar 10k-20ktl, Руководство пользователя

Страница: 14 / 35

All rights reserved Shenzhen SOFARSOLAR Co ., Ltd.
C
Document Version 2.0(2016.03.29) 21 All rights reserved Shenzhen SOFARSOLAR Co ., Ltd.
C
Document Version 2.0(2016.03.29) 22
User manual User manual
Installation Installation
Figure3-4 Moving the Sunny Horse Series (2)
Step 2 Lift the Sunny Horse Series from the packing case and move it to the installation
position.
End
Step 1 To determine the position for drilling holes, level hole positions, and then mark the
hole position by using a marker, use the hammer dril to dril hole on the wall. Keeping the
hammer perpendicular to the wall, do not shake when drilling, so as not to damage the walls.
If the aperture errors, need to reposition.
Attention
To prevent device damag and personal injury, keep balance when moving the
Sunny Horse Series because the Sunny Horse Series is heavy.
Do not put the Sunny Horse Series with its wiring terminals contacting the floor
because the power ports and signal ports are not designed to support the weight
of the Sunny Horse Series. Place the Sunny Horse Series horizontally.
When placing the Sunny Horse Series on the floor, put foam or paper under the
Sunny Horse Series to protect its shell.
3.6 Installing the Sunny Horse Series
Step 2 The expansion screw is vertically inserted into the hole, pay attention to expanding
screw insertion depth (not too shallow).
Step 3 Putting the rear panel on the wall, the rear panel is fixed by the nuts.
Step 1 Step 2 Step 3
Sunny Horse Series
(
10K~20KTL) Sunny Horse Series
(
10K~20KTL)
End
Step 4 Putting the Sunny Horse Series hook on the rear panel.
Step 5 Using an M6 screw back and inverter bottom fastening, to ensure safety.
Step 6 Putting the rear panel and inverter to lock together, In order to ensure the safety (the
user can select lock according to the actual situation).
Step 4 Step 5 Step 6