25
SUNSYS H50
- Ref.: IOMSUNHMXX05-GB 01
ENGLISH
10. REMOVAL OF INVERTER
WARNING!
carry out the following steps beforehand:
- Open the AC switch.
- Open the DC switch.
- Make sure the system cannot be restarted.
- Make sure the electricity supply has been disconnected.
If it is necessary to remove the inverter proceed as follows:
1. Open the AC breaker on main dirsribution pannel to disconnect main supply.
2. Open the DC breaker to isolate the power feed from the photovoltaic field
3. Use a suitable meter to verify the absence of AC and DC voltages.
4. Remove the AC connections
5. Remove the DC connections to isolate the PV field.
6. Remove the RS485 communication cable connection.
Once these steps have been completed, remove the nut and washer on the lower part of the inverter than remove the inverter by
sliding it up from the bracket.
10.1-1
Italy self test view
