socomec PDU 16, Руководство по эксплуатации

Страница: 7 / 11

4
PDU INSTALLATION
THIS MANUAL IS PROPERTY OF
SOCOMEC UPS -
ANY TOTAL OR PARTIAL REPRODUCTION IS STRICTLY FORBIDDEN
Chap.
4
Page
7/11
ENGLISH
EN
4.1 PDU 16 connections
UPS INPUT MAINS INPUT
Connect to load socket on rear
of UPS. Cable supplied
Rotary switch and power
indicator lamps
Connect to mains wall socket. Use
original UPS mains input cord.
Figure 3
Connect loads
Connect UPS input cord here.
Cable supplied
Connect loads
4.2 RACK MOUNT INSTALLATION
(pdu16.03.01)
1. Rack mount installation of the PDU 16 is possible with the use of the rack mounting
brackets (shipped with the PDU) See Figure 4.
2. The rack mount brackets allow you to rack mount the PDU 16 in a 19” enclosure (23” to 19”
rack adapters would have to be purchased separately if you are using the 23” or equivalent
cabinet).
3. The PDU 16 can be mounted to face one of four directions depending on your application,
and utilizing the rack mount brackets provided.
4. Determine the desired position and direction for the PDU, face it in that direction, then
attach the brackets to the PDU with the screws provided.
5. Consult your rack/enclosure manufacturer’s recommendations for specific rack mounting
hardware that will be required.
6. The holes on the rack mount bracket are notched for easy installation. Tighten the PDU
securely to the rails and then follow the startup directions for the PDU in the previous
section, PDU 16 connections.
Rack Mounting Brackets
Figure 4
PDU 16 with rack mounting brackets