socomec DIRIS Am, Руководство по эксплуатации

Страница: 39 / 85

40 SOCOMEC - Ref. : 875 508A
PROGRAMMING THE VOLTAGE TRANSFORMER (VT) 4
PROGRAMMING THE VOLTAGE TRANSFORMER (VT) 5
KEYS INSTRUCTION DISPLAY COMMENT
KEYS INSTRUCTION DISPLAY COMMENT
NB: As a default setting, the network is configured for low voltage operation without a voltage transformer (NO). If you
do not want this, press
▼
. You will pass to the time integration programming (TIME 3I) .If not, proceed as follows:
Press once to display flashing NO
Press once
to programm
the use of a VT
Press once
Press as many times
as necessary to move
to the right, or press
to move to the left.
Press once
Confirm a VT. Press
▼
on to pass to VT
programming
Press
▼
to decrement or
▲
to increment the selected digit value.
Press once to confirm value
Press
▼
once to pass to programming (TIME 3I).
NB: The 6 digits correspond to the primary value (400 000V maximum) and the last 3 digits to the secondary value
(60, 100, 110, 173 and 190V)
NB: The default ratio setting is 100/100. To change it, proceed as follows:
PROGRAMMING INTEGRATION TIME (TIME 3I) 6
KEYS INSTRUCTION DISPLAY COMMENT
NB: The time default setting is 15 minutes (3I 15). If you want this value, press
▼
. You will pass to the power integra-
tion time programming line (TIME P/Q/S) . If not, proceed as follows:
Press once
to display flashing
15 minutes