SOCOMEC - Ref. : 875 645 D
5
EN
G
LI
S
H
CLIMATIC ENVIRONMENT
To guarantee optimum operation, it is
recommended that this device is used
between - 5 to + 45 °C with a relative
humidity of between 20 and 85 %.
Note:
The COUNTIS can be installed on a
DIN EN 50022 rail (DIN 43880).
CONNECTION
The Countis ATv2 and ATiv2 consist of
connection terminals of 1 to 6 mm
2
for
currents and voltages.
Recommendation:
• Avoid close proximity with systems
generating electromagnetic distur-
bances
• Avoid vibrations including accelera-
tions of more than 1 G for frequen-
cies lower than 60 Hz.
SAFETY INSTRUCTIONS (U, I, F)
To avoid damaging the device, take
care to observe the following before
connecting the device :
• indications on the casing,
• network frequency: 50 or 60 Hz,
•
maximum permanent voltage at
voltage input terminals of 400 V AC
± 20 %
phase/phase,
• maximum permanent current of 7 A
(connection from current transfor-
mer(s)).
Note:
The minimum torque for the fixed
terminal is 0.8 Nm.
Recommendation:
We recommend that the auxiliary
voltage and the voltage inputs should
be protected with 0.5 A fuses or
BS 88 2A gG.
INSTALLATION
PRESENTATION (continued)
1
2
5
4
3
COUNT 119 B
a
kWh display
b
Total and partial meter display, or scrolling parameter settings
c
Displays t1 and t2 rate meters
d
Flashing LED consumption indicator (10 Wh/pulse)
e
Validation/scrolling of parameter settings
COUNTIS ATiv2 DOUBLE RATE
