SocketMobile SoMo 655, Руководство пользователя

Страница: 48 / 72

48
STEP 1: Charge the CHS
Refer to your CHS manual for hardware preparation instructions. You may also want to attach the tether.
If you have a 1D version of the CHS (7C, 7E, 7M, 7NRx or 7P) you will need to perform extra steps:
Change the CHS to SPP mode. Power on the CHS. Print out
this page and scan this barcode.
Do not scan this barcode on
your computer screen.
Use the Bluetooth software to start a device search and pair with the CHS.
•
Press the right side application button , which by default launches the wireless manager.
•
If
Bluetooth
is not enabled, tap on the Bluetooth button .
•
Tap Options | Bluetooth Settings
•
At the bottom of the screen, tap
Add
.
• In the list of found devices, select the CHS.
• Complete the remaining screens.
• If prompted for a passkey, enter 0000 (four zeroes).
•
After pairing, tap on the COM Ports tab. Add an outgoing COM port for the CHS.
STEP 2: Install Socketscan 10
1.
In the Today screen, tap Getting Started .
2.
In the list of Getting Started wizards, tap Set up SocketScan 10 .
3.
Tap the link to install the software.
PASSKEY = 0000