38
•
Treat your product with care. Keep in a clean and dust-free place.
•
Changes or modifications of this product, not expressly approved by Socket, may
void the user’s authority to operate the equipment.
Antenna Care
Do not place a metallic shield around the
Bluetooth
Cordless Hand Scanner since it
will reduce the radio transmission efficiency.
Efficient Use
For optimum performance, please make sure that there is no metal surrounding
your
Bluetooth
Cordless Hand Scanner.
Driving
RF energy may affect some electronic systems in motor vehicles, such as car stereo,
safety equipment, etc. Check with your vehicle manufacturer to be sure that the
Bluetooth
Cordless Hand Scanner will not affect the vehicle’s electronics.
Aircraft
•
Turn off your
Bluetooth
Cordless Hand Scanner before boarding any aircraft.
•
To prevent interference with communications systems, you must not use your
Bluetooth
Cordless Hand Scanner while the plane is in the air.
•
Do not use it on the ground without permission from the crew.
Radio Frequency Exposure
Your
Bluetooth
Cordless Hand Scanner contains a radio transmitter and receiver.
When in operation, it communicates with a
Bluetooth
enabled mobile computer by
receiving and transmitting radio frequency (RF) magnetic fields in the frequency
range 2400 to 2483.5 MHz. The output power of the radio transmitter is 15.75 mW.
The
Bluetooth
Cordless Hand Scanner is designed to be in compliance with the RF
exposure limits set by national authorities and international health agencies
1
when
installed or used separately from other antennas or radio transmitters.
1
Examples of RF exposure standards and guidelines:
ICNIRP, “Guidelines for limiting exposure to time-varying electric, magnetic, and electromagnetic fields
(up to 300 GHz)”, International Commission on Non-Ionizing Radiation Protection (ICNIRP), Health Physics,
vol. 74, pp 494-533, April 1998.
99/519/EC, EU Council Recommendation on the limitation of exposure to the general public to
electromagnetic fields 0 Hz – 300 GHz, Official Journal of the European Communities, July 12, 1999.
ANSI/IEEE C95.1-1992, “Safety levels with respect to human exposure to radio frequency electromagnetic
fields, 3 kHz to 300 GHz”, The Institute of Electrical and Electronics Engineers, Inc., New York, 1991.
FCC Report and Order, ET Docket 93-62, FCC 96-326, Federal Communications Commission (FCC), August
1996.
Radiocommunications (Electromagnetic Radiation Human Exposure) Standard 1999, Australian
Communications Authority (ACA), May 1999.