Socket & See PDL 200A Series, Руководство пользователя

Страница: 4 / 12

4
PDL Series
Operation overview continued
The PDL 200A and PDL 234 are multifunction testers, testing no-trip loop,
mains voltage, correct socket wiring and polarity.
Correct socket wiring and correct polarity
The difference between the PDL 200A and PDL 234 is that the PDL 200A
uses a fixed lead and plug, and the PDL 234 uses an IEC connector
interface to enable use with alternative lead sets.
On plugging in and powering up your Socket & See PDL 200A and
PDL 234 Loop Testers the tester will first go through a brief self
check routine and then check that the socket is correctly wired by
showing three green (green for GO) LED’s with a continuous tone -
if there is anything other than three green LED’s do not proceed (the
testers will be automatically inhibited from further tests).
In addition the tester will show the live-neutral voltage by LED
indication.
If everything is correct pushing the test button will carry out a no-trip
loop test and display the result by LED indication.
Finally - always touch the polarity test pad to double check the
total system is correctly wired (see previous page).