Erwin building instruction November 2006
ASSEMBLING THE MODEL
5. V-tail
The V-tail is ready prepared with holes for screws to be fixed
on the fuselage.
Controlling of the elevator:
Bend two levers as shown below and glue the ball
connectors to one end each. Then glue the levers to the
control surfaces of the elevator. The gluing spot should be as
near as possible to the turning axis of the controls (silicone
hinge).
Scale 1:1
Before glueing you must make a hole in the fuselage and the
elevator to give place for the levers. For this you can use a
file or a rotary grinder. (Newer models will have this
prefabricated.)
Ready mounted levers with ball connectors.
www.pcm.at
5
