Erwin building instruction November 2006
DATA
1. Kit – contents
Kit with kitparts:
Fuselage, in two parts
Wing, in two parts
V-Tail
Steel-connector, 2 piece
Carbon-connector, 1 piece
Covers for servos on wing, 4 pieces
Push rods, aluminium, for the elevator
Supporting frame, balsa, for push rods
Ball connectors for the elevator
Levers for rudders, 4 pieces
Servoboard
Fixing board for servoboard
Screws for fixing the V-tail, 2 pieces
Adhesive decoration film (just with unpainted models)
Building instruction
2. What else do you need:
Tape, f.e. Tesa
Epoxy-glue (for example UHU 300 endfest or Stabilit, no
fast hardening epoxy resin)
Controls of the wing:
Connectors for push rods, M2,5mm, 8 pieces
Welding rod, d=2mm
On/Off-switch / socket for loading
cables
Cable for antenna, possibly steel wire for extension of
antenna
Plugs
3. Electronical equipment
Servos for the wing:
Hitec
HS 81
HS 85 (just for flap)
HS 125
(you have to cut the mounting eye, fixing of the servo by gluing)
HS 5125
(you have to cut the mounting eye, fixing of the servo by gluing)
Volz
Wing Maxx
Wing Star
Graupner
2481 (no metal gear)
Servos for the V-tail:
Hitec
HS55
Receiver:
Simprop Scan 7
Accumulators:
1100 mA/h NiMh
www.pcm.at
3
