SNOWJOE SUNJOE WA24C-LT, Руководство оператора

Страница: 11 / 20

11
Using the 12 V Car Kit Power Adapter
In addition to the battery, the unit is also equipped with a car
kit power adapter. The 12 V Car Kit Power Adapter allows you
to use a car's cigarette lighter socket to power the portable
washer.
m
CAUTION!
The car kit power adapter is tested and
approved to be used with the cordless portable washer. Do not
use the portable washer with any other DC/AC adapter.
m
WARNING!
Do not operate the car kit power adapter
when driving.
m
WARNING!
When using the car kit power adapter,
basic safety precautions should always be followed to reduce
the risk of fire, electric shock, and personal injury. These
include:
• Do not use this adapter with any other products that
haven't been approved by Snow Joe
®
+ Sun Joe
®
.
• Do not attempt to disassemble, service, or repair the
adapter.
• Do not expose the adapter to moisture, or expose it to
heat for extended periods. Don't leave it in the car or other
locations where it may get too hot.
• If the car kit power adapter requires service or maintenance,
please call the Snow Joe
®
+ Sun Joe
®
customer service
center at 1-866-SNOWJOE (1-866-766-9563).
To use the car kit power adapter with the spray washer, follow
the instructions below.
1. Make sure the car is switched on. Remove the car's
cigarette lighter from the socket.
2. Insert the cigarette adapter of the car kit power adapter
into the cigarette lighter socket (Fig. 8).
2. Insert the car kit's power adapter into the battery
compartment. Thread the power cord through the notch in
the battery compartment door, and close securely (Fig. 9).
5. Start the unit as instructed in the Operation section.
NOTE: The car kit adapter must be connected with the
cigarette lighter socket before connecting with any appliance.
Using the Spray Gun
m
WARNING!
High-pressure jets can be dangerous if
subject to misuse. The jet must not be directed at persons,
pets, live electrical equipment, or the appliance itself.
1. To use the spray gun, pull back the trigger to start the
water flow. Release the trigger to stop the water flow
(Fig. 10)
2. For continuous operation, push the trigger and lock it in
position 1 or position 2 (Fig. 11).
Fig. 8
Cigarette lighter
socket
Cigarette
adapter
Fig. 9
Power adapter
Fig. 10
Trigger
Pull back to
start water flow
Fig. 11
Position 2
Position 1