SNOWJOE SUNJOE WA24C-LT, Руководство оператора

Страница: 10 / 20

10
m
CAUTION!
FIRE HAZARD. When disconnecting the
charger from the battery, be sure to unplug the charger from
the outlet first, then disconnect the charger from the battery
m
WARNING!
This charger does not automatically
turn off when the battery is fully charged. Please take care
not to leave the battery plugged into the charger. Switch
off or unplug the charger at the mains when charging is
complete.
4. Timely recharging of the battery will help prolong the
battery's life. You must recharge the battery pack when
you notice a drop in the equipment's power.
IMPORTANT! Never allow the battery pack to become fully
discharged as this will cause irreversible damage to the
battery.
Operation
St Stopping
m
IMPORTANT!
This pressure washer is equipped with
a micro-switch sensitive to water flow. This Total Stop System
(TSS) senses water flow in the pump. When the trigger is
released, water stops flowing through the pump. The TSS then
automatically turns the motor off to protect the pump from
overheating, thus saving energy and prolonging pump life.
1. Fill the water tank with clean water (Fig. 5).
m
WARNING!
The intake water temperature must not
exceed 140ºF/60ºC.
m
CAUTION!
The washer must only be used with clean
water; use of unfiltered water containing corrosive chemicals
will damage the washer.
2. Open the battery compartment cover and slide the battery
in until it clicks to lock it into position, then close the
battery compartment cover (Fig. 6).
3. Position the washer as CLOSE as possible to the
object that need to be cleaned.
NOTE: The washer must be used on a secure and stable
surface in a standing, upright position.
4. Press the ON (I) side of the On/Off switch to start the
portable washer and squeeze the spray gun trigger to use
the machine (Fig. 7).
NOTE: It's recommended to bleed the air in the high-
pressure hose every time before starting the spray washer.
Follow the instructions in Maintenance section to bleed
the air.
5. To shut down the unit, push the OFF(O) side of the On/Off
switch (Fig. 7), and remove the battery or disconnect the
car kit power adapter.
Fig. 5
Fig. 6
Battery
Fig. 7
On/Off
switch
On
Off