7
5. Attach the hose upper frame panel onto the front of the
upper frame and secure it with the pair of machine screws
and nuts (Fig. 4).
6. Install the foam cannon onto the back of the upper frame
panel (Fig. 5).
7. Fit the lance into the trigger gun and rotate the collar until
the two parts are completely locked (Fig. 6).
8. Connect the high-pressure hose to the trigger gun (Fig. 7).
Fig. 4
Upper frame panel
Machine
Screws
Nuts
Fig. 5
Upper
frame
panel
Foam
cannon
Fig. 6
Stainless
steel lance
Trigger gun
Collar
9. Connect the other end of high-pressure hose to the water
outlet of the pressure washer (Fig. 8).
m
WARNING!
Keep hose away from sharp objects.
Bursting hoses may cause injury. Examine hoses regularly and
replace if damaged. Do not attempt to mend a damaged hose.
10. Thread your garden hose (male end) into the water inlet
(Fig. 9). The garden hose must have an internal
diameter of at least 13 mm (1/2 in.) and must be
reinforced. The water supply must be at least equal to the
washer delivery capacity.
High-pressure hose
Trigger gun
Fig. 7
Fig. 8
High-pressure hose
Water outlet
Fig. 9
Garden hose
Water inlet
