SNOWJOE Sunjoe SPX7001E-RM, Руководство оператора

Страница: 16 / 24

16
Maintenance
m
CAUTION!
Before working on the pressure
wet/dry vacuum, disconnect the plug from the power supply
socket.
Clean the Adapter Filter and the Nozzle
1. To ensure good performance, check and clean the adapter
filter (Fig. 23). Remove the filter and rinse with warm water
to prevent any foreign matter from clogging the pump
(Fig. 24).
2. Clean the nozzle with the needle clean-out tool provided
(Fig. 25 ). Remove the spray wand from the gun; remove
any dirt from the nozzle hole and rinse.
Clean and Change the Dust Filter
m
WARNING!
Use only original manufacturer’s
replacement parts, accessories and attachments. Failure to do
so can cause possible injury and poor performance.
To order genuine replacement parts or accessories for the
Sun Joe
®
SPX7001E-RM electric pressure wet/dry
vacuum, please visit sunjoe.com or contact the Snow Joe
®
+
Sun Joe
®
customer service center at 1-866-SNOWJOE
(1-866-766-9563).
1. Remove the dust tank from the unit, and separate the dust
bin and dust tank cap with filter (Figs. 19 – 20).
2. Holding the dust tank cap, twist the filter counterclockwise
to disassemble it from the cap (Fig. 26).
3. Clean the filter by gently tapping or brushing dirt off.
If needed, wash the filter under running water and let
it air dry before reusing. For optimal performance, it's
recommended to regularly replace the filter.
4. To assemble a new filter, put the new filter onto the dust
tank cap as shown, and twist clockwise to insert the tabs
on the filter into the slots on the cap (Fig. 27).
Fig. 23
Adapter filter Garden hose adapter
Fig. 24
Filter
Fig. 25
Needle clean-out tool
Fig. 26
Filter
Dust tank cap