background image

4

16.  Follow all charging instructions and do not charge the 

battery pack or appliance outside of the temperature range 

specified in the instructions. Charging improperly or at 

temperatures outside of the specified range may damage 

the battery and increase the risk of fire.

17.  Prevent unintentional starting – Ensure the switch is in the 

off-position before connecting to battery pack, picking up 

or carrying the appliance. Carrying the appliance with your 

finger on the switch or energizing an appliance that has the 

switch on invites accidents.

18.  Disconnect battery pack before cleaning or servicing –  

Disconnect the battery pack from the appliance before 

making any adjustments, changing accessories,  or storing. 

Such preventive safety measures reduce the risk of starting 

the appliance accidentally.

19.  Do not short circuit – When battery pack is not in use, 

keep it away from other metal objects, like paper clips, 

coins, keys, nails, screws or other small metal objects, 

that can make a connection from one terminal to another. 

Shorting the battery terminals together may cause burns or 

a fire.

20.  Replacement parts – When servicing this unit, use only 

identical replacement parts.

21.  Do not modify or attempt to repair the appliance or the 

battery pack (as applicable) except as indicated in the 

instructions for use and care.

22.  Have servicing performed by a qualified repair person 

using only identical replacement parts. This will ensure 

that the safety of the product is maintained.

Information about the charger and the  

charging process

1.  Please check the data marked on the rating plate of the 

battery charger. Be sure to connect the battery charger to a 

power supply with the voltage marked on the rating plate. 

Never connect it to a different mains voltage.

2.  Protect the battery charger and its cord from damage. Keep 

the charger and its cord away from heat, oil and sharp 

edges. Have damaged cords repaired without delay by a 

qualified technician at an authorized Snow Joe

®

 +  

Sun Joe

®

 dealer or call the Snow Joe

®

 + Sun Joe

®

 customer 

service center at 1-866-SNOWJOE  (1-866-766-9563).

3. 

Electrical plugs must match the outlet. Never modify 

the plug in any way. Do not use any adapter plugs with 

grounded appliances. Unmodified plugs and matching 

outlets will reduce the risk of electric shock.

4.  Keep the battery charger, battery pack(s) and the cordless 

tool out of the reach of children.

5.  Do not use the supplied battery charger to charge other 

cordless tools.

6.  During periods of heavy use, the battery pack will become 

warm. Allow the battery pack to cool to room temperature 

before inserting it into the charger to recharge.

7.  Do not overcharge batteries. Do not exceed the maximum 

charging times. These charging times only apply to discharged 

batteries. Frequent insertion of a charged or partially charged 

battery pack will result in overcharging and cell damage.  

Do not leave batteries in the charger for days on end.

8. 

Never use or charge batteries if you suspect that it has been 

more than 12 months since the last time they were charged. 

There is a high probability that the battery pack has already 

suffered dangerous damage (exhaustive discharge).

9. 

Charging batteries at a temperature below 41°F (5°C) will 

cause chemical damage to the cells and may cause a fire.

10.  Do not use batteries that have been exposed to heat during 

the charging process, as the battery cells may have suffered 

dangerous damage. 

11. 

Do not use batteries that have suffered curvature or 

deformation during the charging process or those that 

exhibit other atypical symptoms (gassing, hissing, cracking, 

etc.)

12. 

Never fully discharge the battery pack (maximum 

recommended depth of discharge is 80%). A complete 

discharge of the battery pack will lead to premature aging of 

the battery cells.

Protection from environmental influences

1.  Wear suitable work clothes. Wear safety goggles.
2.  Protect your cordless tool and the battery charger from 

moisture and rain. Moisture and rain can cause dangerous 

cell damage.

3.  Do not use the cordless tool or the battery charger near 

vapors and flammable liquids.

4.  Use the battery charger and cordless tools only in dry 

conditions and at an ambient temperature of 41ºF – 105°F 

(5°C – 40.5°C).

5.  Do not keep the battery charger in places where the 

temperature is liable to reach over 105°F (40.5°C). 

 

In particular, do not leave the battery charger in a car that is 

parked in the sunshine.

6.  Protect batteries from overheating. Overloads, overcharging 

and exposure to direct sunlight will result in overheating and 

cell damage. Never charge or work with batteries that have 

been overheated – replace them immediately, if possible.

7.  Store the charger and your cordless tool only in dry 

locations with an ambient temperature of 41ºF – 105°F (5°C 

– 40.5°C). Store your lithium-ion battery pack in a cool, dry 

place at a temperature of 77°F (25°C). 

 

Protect the battery pack, charger and cordless tool from 

humidity and direct sunlight. Only place fully charged 

batteries in storage (charged to at least 40%).

8.  Prevent the lithium-ion battery pack from freezing.  

Battery packs that were stored below 32°F (0°C) for more 

than 60 minutes must be discarded.

9.  When handling batteries, be wary of electrostatic charge. 

Electrostatic discharges can damage the electronic 

protection system and the battery cells. Avoid electrostatic 

charging and never touch the battery poles.

Содержание SUNJOE 24V-WSB-LTE

















Отзывы: