background image

2

Additional Safety Instructions

•  Do not use the workshop vacuum in the rain or in 

a damp area.

•  Use extra care when cleaning on stairs or steps.
•  Keep firm footing and maintain good balance at all times. 

Do not overreach. Overreaching can result in loss of 

balance.

•  Turn off all controls before unplugging the tool.
•  Do not use the tool if the power switch does not turn it ON 

or OFF. Any tool that cannot be controlled with the switch is 

dangerous and must be repaired.

•  Carefully inspect your appliance prior to use and follow all 

label and marking instructions. 

•  Keep all parts of your body away from any moving parts 

and all hot surfaces of the unit.

•  Do not put any object into the tool's openings. Do not use 

the tool with any opening blocked; keep openings free of 

dust, lint, hair, or any other object that may reduce air flow.

•  Check the work area before each use. Remove all objects 

such as rocks, broken glass, nails, wire, or string, which can 

be thrown or become entangled in the machine.

•  Service on the product must be performed by qualified 

repair personnel only. Service or maintenance performed 

by unqualified personnel could result in injury to the user or 

damage to the product.

•  This workshop vacuum is intended for residential 

use only. Commercial use of this product is prohibited and 

will void the manufacturer's warranty.

•  Never run the unit without the proper equipment attached. 

Always ensure the workshop vacuum tube is 

properly installed.

•  Always grasp the handle when operating the unit, 

 

only operate the machine in its intended orientation.

•  Do not use to pick up flammable or combustible liquids, 

such as gasoline, or use in areas where they may be present.

•  Do not pick up anything that is burning or smoking, such as 

cigarettes, matches, or hot ashes.

•  Do not use without dust bag in place.

Specific Safety Rules For 

 

Workshop Vacuum

•  The workshop vacuum has been designed to clear 

light debris and leaves from hard surfaces – not for clearing 

grassed areas.

•  When operating the unit, never point the workshop Blower 

+ vacuum tube in the direction of people or pets or in the 

direction of windows. Use extra caution when blowing 

debris near solid objects, such as trees, automobiles, 

 

and walls. 

•  Be sure to secure the unit when transporting it. 
•  Never douse or squirt the unit with water or any other liquid. 

Clean the unit after each use as described in the cleaning 

and storage section. 

Battery & Charger  

Safety Instructions

We pay a great deal of attention to the design of every battery 

pack to ensure that we supply you with batteries that are safe, 

durable and have a high energy density. The battery cells have 

a wide range of safety devices. Each individual cell is initially 

formatted and its electrical characteristic curves are recorded. 

This data is then used exclusively to be able to assemble the 

best possible battery packs.
Despite all the safety precautions, caution must always be 

exercised when handling batteries. The following points must 

be obeyed at all times to ensure safe use. Safe use can only 

be guaranteed if undamaged cells are used. Incorrect handling 

of the battery pack can cause cell damage.
IMPORTANT!

 Analyses confirm that incorrect use and poor 

care of high-performance batteries are the main factors 

responsible for personal and/or product damage.

m

WARNING!

 Use only approved replacement batteries; 

other batteries may damage the workshop vacuum 

and cause it to malfunction.

m

CAUTION!

 To reduce the risk of injury, charge the

iON+ 24V lithium-ion battery pack only in its designated

iON+ 24V lithium-ion charger. Other types of chargers present 

risk of fire, personal injury and damage. Do not wire a battery 

pack to a power supply plug or car cigarette lighter. Such 

misuse will permanently disable or damage the battery pack.

• 

Avoid dangerous environments – Do not charge the 

battery pack in rain, snow or in damp or wet locations. 

Do not use the battery pack or charger in the presence of 

explosive atmospheres (gaseous fumes, dust or flammable 

materials) because sparks may be generated when inserting 

or removing the battery pack, which could lead to a fire.

• 

Charge in a well-ventilated area – Do not block the 

charger vents. Keep them clear to allow for proper 

ventilation. Do not allow smoking or open flames near a 

charging battery pack. Vented gases may explode.

  NOTE: The safe temperature range for the battery is  

41°F – 105ºF (5°C – 40.5°C). Do not charge the battery 

outside in freezing weather; charge it at room temperature. 

• 

Maintain charger cord – When unplugging the charger,  

pull the plug, not the cord, from the receptacle to reduce 

the risk of damage to the electrical plug and cord.  

Never carry the charger by its cord or yank it by the cord 

to disconnect it from the receptacle. Keep the cord away 

from heat, oil and sharp edges. Make sure the cord will not 

be stepped on, tripped over or subjected to damage or 

stress when the charger is in use. Do not use the charger 

with a damaged cord or plug. Replace a damaged charger 

immediately.

• 

Do not use an extension cord unless it is absolutely 

necessary – Using the wrong, damaged or improperly 

wired extension cord poses a risk of fire and electric shock. 

If an extension cord must be used, plug the charger into a 

properly wired 16 gauge or larger extension cord with the 

female plug matching the male plug on the charger. Make 

sure that the extension cord is in good electrical condition.

Содержание SUNJOE 24V-WSB-LTE

















Отзывы: