background image

7

Safety Symbols

The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all 

instructions on the machine before attempting to assemble and operate.

READ THE OPERATOR'S 

MANUAL(S) – Read, understand 

and follow all instructions in the 

user manual(s) before attempting 

to assemble and operate.

SAFETY ALERT – Indicates a 

precaution, a warning or a danger.

The rotating part will continuously 

run for several seconds after you 

turn off the machine.

WARNING! Do not expose the unit 

to rain or wet conditions.

CAUTION! Avoid contacting the 

guide bar tip with any object. Tip 

contact may cause the guide bar 

to move suddenly upward and 

backwards, which may cause 

serious injury to the user.

WEAR EYE AND HEARING 

PROTECTION – For protection 

against injury, wear ear defenders 

and safety goggles.

WARNING! Two hands are 

always to be used when 

operating the chain saw.

Correct direction of cutting teeth.

Keep bystanders and children a 

safe distance away.

Symbols

Symbols

Descriptions

Descriptions

Indoor use only. Only use battery 

charger indoors.

m

DANGER! ROTATING  

BLADES – Keep hands and  

feet away from openings while the 

saw is running.

Wear safety footwear at all times to 

provide protection against objects 

that may accidentally fall on feet.

Wear safety gloves during use to 

protect hands.

The rotating part will continuously 

run for several seconds after you 

turn off the machine.

Содержание Sunjoe 20ViONLTE-CS10-RM





























Отзывы: