3
5.
Make sure the battery charging cable is located in a safe
place so that it will not be stepped on, tripped over or
otherwise subjected to damage or stress.
6. An extension cord should not be used unless absolutely
necessary. Using an improper extension cord poses a risk
of fire, electric shock or electrocution.
7. Do not operate the charger if it has received a sharp
blow or has become damaged in any way. Contact
the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563) before continuing
use.
8.
Do not disassemble the charger. If the charger requires
service or repair, contact an authorized Snow Joe
®
+
Sun Joe
®
dealer or call the Snow Joe
®
+ Sun Joe
®
customer service center at 1-866-SNOWJOE
(1-866-766-9563). Incorrect reassembly poses a risk of
electric shock, electrocution or fire.
9.
To reduce the risk of electric shock, unplug the charger
from the outlet before cleaning the tool.
10.
Never attempt to connect two (2) chargers together.
11.
The charger is designed to operate on standard
household electrical power (120 V). Do not attempt to use
it with any other voltage!
NOTE:
The integrated battery is not fully charged out of
the carton. Read the safety instructions and then follow
the charging notes and procedures.
12.
Let the tool charge initially for 5 hours.
m
WARNING!
Do not use the tool while it is conected to
the charger.
m
WARNING!
Fire Hazard. When disconnecting the
charger from the tool, be sure to unplug the charger from the
outlet first, then disconnect the charger cord from the tool.
13.
The longest life and best performance can be obtained if
the integrated battery is charged when the air temperature
is between 64.4ºF – 75.2ºF (18ºC – 24ºC). Do not charge
the battery pack when the air temperature falls below
50ºF (10ºC) or above 104ºF (40ºC). Following these safety
measures will prevent damage to the battery pack.
14. Do not incinerate the integrated battery even if it is
seriously damaged or completely worn out. The battery
can explode in a fire.
