2
Battery Tool Use and Care
1. Recharge only with the charger specified by the
manufacturer – A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
2. Charge internal battery at ambient temperatures
between 50ºF – 104ºF (10ºC – 40ºC).
3. Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help –
Liquid ejected from the
battery may cause irritation or burns.
Service
1. If your power tool requires service, contact an
authorized Snow Joe
®
+ Sun Joe
®
dealer or call the
Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563). Only identical
replacement parts should be utilized for repairs. This will
ensure that the safety of the power tool is maintained.
2. If the battery charger cable is damaged, it must be
immediately replaced to avoid a hazard. Contact
the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563) for assistance.
Safety Rules for Cordless
Screwdriver
1. Hold screwdriver by insulated gripping surfaces when
perfoming an operation where the screwdriver may
contact hidden wiring or its own cord – Contact with a
"live wire" will make exposed metal parts of the tool "live"
and shock the operator.
2. Use clamps or another practical way to secure and
support the work piece to a stable platform. Holding
the work by hand or against your body leaves it unstable
and may lead to loss of control.
3. Keep your hair, clothing, and gloves away from air
vents. Air vents often cover moving parts in which these
items can be caught.
4.
Make sure approved eye protection is being worn and
properly adjusted and secured at all times the screwdriver
is being used. There is a possibility that small pieces of
metal could shear off from over-tightened screws while
using the tool.
5. Keep children at a safe distance while using the cordless
screwdriver. Distractions can cause inadvertent misuse
resulting in possible injury to children or to the user.
6. Use only screwdriver bits that are designed for use with
this screwdriver.
7. Do not plug the AC charger into an outlet where it can be
exposed to water. Do not lay the screwdriver in or near
water while it is plugged into the AC charger. Failure to
comply with this warning can result in severe electrical
shock or severe burns to anyone who touches the charger
or the screwdriver.
8. Use only the AC charger that came with the cordless
screwdriver.
9. Do not attempt to charge the screwdriver if the power
cord is broken or frayed. Always store the charger in a
clean dry location until it is needed.
10.
Before use, carefully check the screwdriver to determine
whether it will operate and perform its intended function.
11.
Check for misalignment or binding of moving parts,
breakage of parts, and any other condition that may affect
the screwdriver's operation. Do not use the tool if you find
damaged or missing parts.
12. Do not use the screwdriver if f reverse selector
switch does not work.
13.
Never attempt any repairs youself. It is recommended that
all repair or replacement for the tool shall be performed by
a qualified service technician.
14. Do not carry the screwdriver
with your finger on the
f reverse selector switch.
15. Do not abuse battery charger cord.
16.
Never carry the charger by its cord or pull the cord to
disconnect it from the socket.
17.
Keep the cord away from heat, oil, and sharp edges.
18.
DO NOT store or use the tool in locations where the
temperature may reach or exceed 105 ºF (40.5 ºC).
Dangerous storing locations include outdoor sheds or
metal buildings in the summer.
19.
When not in use, store the screwdriver and charger in a
dry, locked or high place out of reach of children.
20.
Keep handles and switches dry, clean and free from oil
and grease.
B Charger
Safety Warnings
This manual contains important safety and operating
instructions for your battery and charger.
1.
Before using the charger, thoroughly read all instructions
and cautionary markings on the screwdriver.
m
WARNING!
If the screwdriver housing is cracked or
damaged, do not insert the charger plug into the power tool,
or plug the charging adapter into the mains outlet. There is a
danger of electric shock or electrocution.
2.
This charger is ONLY intended to charge this rechargeable
battery. Any other use poses a risk of fire, electric shock
or electrocution.
3. Do not place any object on top of the charger or place
the charger on a soft surface that may result in excessive
internal heat. Keep the charger away from any heat
source.
4.
To reduce the risk of damaging the electric plug and
cord, pull the plug, not the cord, when disconnecting the
charger from the electric outlet.
