7
Chute Assembly
1. Remove the locking collar from the base of the discharge
chute.
2. Ensure that the chute clip is in its cradle (see Fig. 3).
Figure 3
3. Align the discharge chute onto the unit (see Fig.4).
Note: You will need to hold the discharge chute in place.
Figure 4
4. Using the locking collar, secure the discharge chute to the
base (see Fig. 5-1, 5-2).
Note: The clip on the locking collar must be in the back of the
discharge chute.
Figure 5-2
Chute Clip
Figure 5-1
Figure 2-3
SJ_803_MANUAL ENG_R_Layout 1 9/2/10 2:23 PM Page 7
