SNOWJOE MAX SJ803 Скачать руководство пользователя страница 2

Страница: 2 / 20

Record Product Information

Customer Support

Model #:

Serial #:

Please record the following numbers from the decal on the main cover of
your new product:

J 8 0

DO NOT return this SNOW JOE/SUN JOE

product to the Retailer!

Please call our customer service team for

assistance at

866-766-9563 (866-SNOW-

JOE)

Or visit

www.snowjoe.com

and click on

‘Customer Service’

Our service representatives and technicians will be happy

to assist you with any questions you may have. Our office

hours are 9am to 5:30 pm Eastern Time.
Thank you for choosing our products!

STOP

Table of Contents

Safety..........................................................................................................

Assembly...................................................................................................

Controls and Features..............................................................................

Operation..................................................................................................

Maintenance & Adjustments..................................................................

Troubleshooting.......................................................................................

Replacement Parts...................................................................................

Warranty....................................................................................................

Model and Serial Numbers

When contacting the company, reordering parts, or

arranging service from an authorized dealer, you will

need to provide the model and serial numbers, which

can be found on the bottom of the engine mount. Copy

these numbers into the space provided to the right.

SJ_803_MANUAL ENG_R_Layout 1 9/2/10 2:23 PM Page 2

Содержание MAX SJ803





















Результаты поиска

Содержание MAX SJ803

Отзывы:

Похожие инструкции для MAX SJ803

Бренды по названию

Популярные бренды

SNOWJOE MAX SJ803, Руководство оператора

Результаты поиска

Содержание MAX SJ803

Отзывы:

Похожие инструкции для MAX SJ803

Бренды по названию

Популярные бренды