SNOWJOE iON21SB-PRO, Руководство оператора

Страница: 7 / 20

7
Unpacking
Carton Contents:
• Cordless snow blower
• EcoSharp
®
PRO 40 V 5.0 Ah battery
• EcoSharp
®
40 V battery charger
• Safety key
• Handle knobs/Deflector knobs (4)
• Square J-bolts (2)
• Carriage bolts (2)
• Rubber washers (2)
• Manual with registration card
1. Carefully remove the cordless snow blower and check to
see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new cordless snow
blower. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils,
or small parts. These items can be swallowed and pose a
suffocation risk!
Assembly
Assembling the handles
For easy assembly, your snow blower comes equipped with
most of its parts already connected. In just a few simple steps,
your snow blower will be ready for use.
1. To engage the handle, pull up on the upper frame (Fig. 1).
2. Secure the connection of the middle frame to the upper
frame by fastening the handle locks on each side (Fig. 2).
3. Secure the connection of the lower frame to the middle
frame by installing the J-bolts and fastening the handle
knobs on each side (Figs. 3 & 4).
Fig. 1
Fig. 2
Handle locks
Fig. 3
J-bolt
Fig. 4
Handle knob
J-bolt