background image

9

5.  Slide the upper crank rod into the top of the crank rod 

connector (Fig. 12).

6.  Align the holes on the connector with the holes on 

the upper crank rod, insert the thumbscrew and turn 

clockwise to secure it (Fig. 13).

Discharge Chute Assembly 

1. 

Position the chute deflector over the discharge chute 

and align them with the deflector bolts, washers and the 

deflector knobs (Fig. 14).

2. 

Secure the deflector bolts, washers and knobs. Make sure 

the knobs are tightened (Fig. 15)

.

3.  Turn the chute control crank clockwise to ensure the 

discharge chute and deflector are in position.

Battery Pack Operation

The equipment is powered by a lithium-ion battery. The battery 

pack is completely sealed and maintenance free.

Battery Charge Level Indicator

The battery pack is equipped with a push button for checking 

the charge level. Simply press the push button to read off the 

battery charge level from the LEDs of the battery indicator:

•  All 3 level monitoring LEDs are lit: Battery charge level 

 

is high.

•  2 level monitoring LEDs are lit: Battery charge level is 

decreasing. Stop work as soon as possible.

•  1 level monitoring LED is lit: Battery is flat. Stop work 

IMMEDIATELY and charge the battery. Otherwise the 

battery’s service life will be greatly shortened.

NOTE: If the charge level button does not appear to be 

working, place the battery pack on the charger and charge as 

needed.
NOTE:

 Immediately after using the battery pack, the charge 

level button may display a lower charge than it will if checked 

a few minutes later. The battery cells “recover” some of their 

charge after resting.

Fig. 12

Upper crank rod

Lower 

crank rod

Crank rod 

connector

Fig. 13

Thumbscrew

Fig. 14

Deflector knob

Deflector bolt

Washer

Fig. 15

Charge level button 

The battery is at 30% capacity 

and requires charging

The battery is at 60% capacity 

and requires charging soon

The battery is at full capacity

Light Indicators

Lights

Содержание iON15SB-LT





















Отзывы: