14
Replacing the Scraper
The scraper is located at the base of the snow thrower beneath
the rotor housing (Fig. 30).
1. Detach the worn scraper from the snow thrower by
removing the 3 screws that hold it in place (Fig. 31).
Figure 28
A – Scraper
B – Screw
Figure 29
A – Scraper removal
Figure 30
A – Scraper
B – Screw
C – Screwdriver
Figure 27
A – Rubber plate
B – Rivet
C – Small flat washer
D – Bolt
E – Auger
2. Install the new scraper and fasten it securely to the
snow thrower with 3 screws (Fig. 32).
SJ622U1_MANUAL_ENG REV_Document 1 9/2/10 2:33 PM Page 14
