SnowEx RDV V-Plow, Руководство механика

Страница: 26 / 84

Lit. No. 30118, Rev. 00 June 15, 2020
26
CONTROLS
OPERATING THE JOYSTICK CONTROL
1. Turn the vehicle ignition switch to the "ON" or
"ACCESSORY" position.
2. Slide the switch on the side of the control to the
"ON" position. The power indicator light glows
red, indicating that the control is ON. The
indicator light glows red whenever the control
and the vehicle ignition switch are both ON,
and the electrical connections to the snowplow
are completed.
The ON/OFF switch operates as an emergency
stop, if required.
WARNING
The driver shall keep bystanders clear of
the blade when it is being raised, lowered,
or angled. Do not stand between vehicle
and blade or within 8 feet of a moving
blade. A moving or falling blade could
cause personal injury.
Based on Operating Instructions for 84450 & 84460 Joystick Control (Lit. No. 52221, Rev. 00).
Function Time-Outs
All control functions, except LOWER/FLOAT, time
out (stop) automatically after a period of time. This
is to limit the amount of electrical energy required
from the vehicle.
NOTE: If a control function times out before the
desired blade movement is complete, release
the lever to the center position, then move it
back into the desired function.
Automatic Shutdown
The control will automatically turn OFF after being
idle for 20 minutes. To reactivate the control after a
shutdown, move the ON/OFF switch to OFF, then
back to ON.
Smooth Stop
The control automatically allows the blade to
coast to a stop when the lever returns to center
position. This results in smoother operation,
reduces the shock to the hydraulic system, and
increases hose and valve life. For instructions
on enabling/disabling this feature, see the
FLEET FLEX Electrical System section of this
guide.
Control Lever Movement
From the center position, the control lever can be
moved in one of eight directions to control various
movements of the snowplow blade. To change from
one movement of the blade to another, the control
lever must be moved back to the center position
before selecting the desired function. Whenever
the lever is released, it should spring back into the
center position to stop any blade movement.
Moving the control lever diagonally from the
center position toward any of the four digits on
the face of the control body will operate the
SECURITY GUARD™ system. For instructions,
see the SECURITY GUARD System section of
this guide.
L R
RAISE
LOWER
ON/OFF FLOAT
COMPACT
3
WING
IN/OUT
4
WING
IN/OUT
2
1
BUCKET
BLADE™
Positions numbered 1, 2, 3, and 4 control
SECURITY GUARD system functions.