Snow Peak SD-180, Инструкция по эксплуатации

Страница: 20 / 24

19
How to disassemble
●Before storage, the product should be cleaned and dried sufficiently.
●In case of strong winds, please wait for the wind to subside before disassembling.
●Fold the pole from the center to the edges. If folded from the edge, the cord can be overstretched,
which may cause elongation or breakage.
●Pull out all pegs, clean them and store them in the peg case with their heads facing down. All poles should
be stored in the pole carry bag. If the poles are stored bare, it may damage the fabric or the carry bag.
Precautions for disassemble
1
Remove all ropes and pegs from the four
corners of the tent. Ropes should be tied
together while still attached to the fly sheet to
prevent tangling. Pegs should be placed
head first in the peg case.
Disassembling should be done in the reverse order of setup. Make sure there is nothing inside the Tent
and close the exit and entrance panels before beginning.
2
After unfastening the buckles at the four
corners of the tent, remove the Velcro tape
attached to the fly sheet and the tip of the
ridge pole from the grommet and then
remove the fly sheet from the pole. It will be
easier to set up the tent next time if you
stretch the tape of the buckles on the four
corners of the flysheet.
3
Gently stretch the tape where the pole stuck
at the four corners of the floor sheet so that
the pole lies flat.