Snow Peak GigaPower WG STOVE, Инструкция по эксплуатации, Страница: 18 / 23

18
6. Firmly screw the bottle cap to the fuel bottle.
Caution: Confirm that the seal gasket for the bottle cap is free from dust, dirt, and other foreign
materials. If the cap cannot be installed smoothly, remove it and try again. Forcefully installing
the bottle cap may result in damage to the threads in the bottle cap.
7. Disconnect the fuel hose from the stove. Turn the connector
fully counterclockwise . Carefully pull out the fuel hose making
sure that it is not skewed.
Caution: Unfasten the connector by hand. If the screw thread becomes too tight and
cannot be loosened by hand, use the Driver wrench to loosen it.
Caution: Turn the screw thread until it becomes loose. If you attempt to remove the fuel hose
before the screw thread is completely loose and still partly engaged, the fuel hose and/or the
stove may be damaged.
Caution: Carefully remove the fuel hose; do not skew the fuel hose. If the fuel hose becomes
skewed, the rubber gasket may become damaged.
8. Drain off excess gasoline from the fuel hose.
Caution: A small amount of gasoline will remain in the fuel hose. Stand the fuel hose on one end
and gently shake hose to drain the remaining gasoline completely before placing the protective
cap on the fuel hose.
Caution: It is dangerous to disassemble the stove while smoking. Confirm that there is no fire or
open flame nearby in order to avoid the hazard of fuel ignition and/or burns.
9. Storing the Pot support on the stove. While pushing down the Pot
support spring, flip the Pot support toward the flame control .
Caution: The Pot support can be moved only when the Pot support spring is pushed down. If the
Pot support spring is not pushed down, the stove will be damaged.
10. Store all the components in the storage bag.