Snorkel EPV16, Руководство по эксплуатации

Страница: 82 / 96

❑
Operation from ground control station
electric control machines
Emer gency op er a tion from the ground is very sim i -
lar to emer gency op er a tion from the plat form.
➠
Ground con trol sta tion set tings
1. The Emer gency Stop switch

must be
(ON) (see Fig ure 11.8).
2. The
Plat form/Ground Se lec tor switch
€
(see Fig ure 11.8) must be set to GROUND.
Figure 11.8 - Ground Controls, Machines with
Electric Controls
3. Op er ate the En able switch
ƒ
by press ing the
switch down and hold it down .
4. Whilst still operating the enable switch, press
and hold the Emergency Lower switch
„
down and the upper boom will begin
lowering.
5. To op er ate other func tions dur ing the
emer gency lower the fol low ing switches must
be op er ated to gether.
En able
ƒ
Emer gency Lower
„
As soon as these switches are op er ated the
up per boom will be gin de scend ing. If an other
func tion is de sired it must be se lected be fore
the boom has reached the rest po si tion
e.g. Up per or Lower Boom or
†
Slew
‡
page 11 - 4 Rev A EPV16 – 13642-1
11. Emergency Operation
UPPER
BOOM
LIFT
ENABLE
lb
kg
SLEW
ENABLE
JIB
BOOM
START CHOKE ELECTRIC
FUEL
STABILISER
BOOMS
OFF
PLATFORM
ON
ON
BASE
LOWER
BOOM
HEIGHT
LOCKOUT
ENABLED DISABLED
HEIGHT
LOCKOUT
ENABLED DISABLED
SPEED
EMERGENCY
LOWER