EPV16 – 13642-1
Rev A
page 1 - 7
Chapter 1. Safety
WARNING
KEEP
LINES
CLEAR
POWER
OF
Unless the Electrical Supply Authority has advised
in writing otherwise;
the clearance between any live overhead
power line and any part of this machine or
load carried is required
by law
to be
AT LEAST 4 METRES
This is a requirement of regulation 93 of the
Electrical Supply Regulations 1984
in the interests of safe working.
DANGER
BEWARE OF ELECTRICAL HAZARDS
REGULATION 133A OF THE
CONSTRUCTION SAFETY ACT 1912 REQUIRES
(a) Minimum approach of an appliance
(b) Inspection of the work site for
(c) Constant vigilance and an observer required
to live electrical apparatus.
electrical hazards before
commencing to use the appliance.
whilst working or travelling the appliance
in the vicinity of live electrical apparatus.
3m. for voltages up to 132,000
6m. for voltages above 132,000
and up to 330,000
8m. for voltages above 330,000
(New Zealand Only)
(Australia Only)
RATED LOAD
440
LB
12423-200
200
KG
ELECTROCUTION HAZARD
This machine is not electrically insulated.
0072531
99228-1
CAUTION
EACH PERSON ON THE PLATFORM
MUST WEAR A FULL SAFETY HARNESS
WITH LEG STRAPS
AND ENERGY ABSORBING LANYARD
ATTACHED TO AN APPROVED ANCHOR
POINT IN THE PLATFORM
DANGER
MAXIMUM ALLOWABLE
WIND SPEED 12.5m/sec
45198-7
99228-1
13030
0072531
1843
12423-200
9428
DANGER
ELECTROCUTION
HAZARD
THIS MACHINE IS NOT
ELECTRICALLY INSULATED
13030
MACHINES WITH ELECTRIC CONTROLS
45198-7
0150448
0150448
