Snorkel ATB 42, Руководство оператора

Страница: 82 / 87

Chapter 12. Troubleshooting
The chart below lists situations where machine operation may be interrupted. If the problem cannot be
corrected with the action listed, stow the machine and remove it from service. Repairs must be made
by qualified maintenance personnel.
■
Troubleshooting Chart
Problem Cause Remedy
Engine will not start
from the ground control
box. Switches are set wrong.
(Engine will not crank). Set Battery switch to ON.
At the ground control box:
Set the Master Key Switch to ON.
Pull Emergency Stop switch (out) ON.
Set Platform/Ground Selector switch to
GROUND.
Set Master Key Switch to ON for 5
seconds, then turn Master Key Switch
to START.
Main circuit breaker, in
ground control box, has
tripped. (Engine will not
crank.) Wait three minutes, then try to start the
engine. If it will not start, refer the problem
to a qualified service technician.
Out of fuel. (Gasoline or
diesel engine cranks but
will not start). Add fuel to tank, then alternately crank
engine for 20 seconds and let starter
motor cool for 60 seconds (20 on / 60 off).
LPG (Option)
Dual Fuel switch on the
platform control box is set
wrong. (Engine cranks but
will not start).
Set Dual Fuel switch in platform control
box to GAS or LPG.
Check the fuel gauge, on top of the tank,
to see if there is fuel in tank.
For LPG operation: Check to see that fuel
valve, on top of LPG tank, is open.
Alternately crank engine for 20 seconds,
then let starter motor cool for 60 seconds.
Engine will not start from
the platform control box. Stepping on platform foot
switch. (Engine will not
crank).
Be sure you are not stepping on the
platform foot switch, or that the foot switch
is not “blocked” in any way, while you are
trying to start the engine
ATB 42/50 – 0161987 page 12 - 1
Courtesy of Crane.Market